Why is my Salt Generator Displaying ‘High Salt’?
The “High Salt” light indicates that there is a higher salt level than recommended. The “High Salt” light will stay on for several reasons including: cell amperage is above the maximum limit, the control is set to the wrong turbo cell, or, most commonly, there is too much salt in your pool. The LCD display will read “HI”. Check the following: You can utilize your at home testing kit to verify the salt levels in your swimming pool. Once your water has been tested, if the reading is too high, reduce the levels of salt in your pool to bring your levels back to the recommended 3200 ppm. Verify if the control is set to the correct turbo cell. Verify cell amperage to ensure it is not above the maximum limit for your model. Check below for the maximum currents AMPS before the unit shuts down.